WIKA CTH6200 Benutzerhandbuch
Seite 8
WIKA Betriebsanleitung Hand-Held Thermometer
2146872 09/2004 GB/D
8
GB
WIKA Operating Instructions Hand-Held Thermometer
Hand-Held Thermometer
CTH 6200
1
2
3
4
5
6
7
8
1.4 Display
1. Offset: indicates that zero point offset (offset) is activated.
2. Corr: indicates that correction factor is activated.
3. : indicates a low battery and other warnings.
4. Logg: Shown if logger function is selected, flashes if cyclic
logger is running.
5. AL: Flashes if alarm is present.
6. Main display: Currently measured temperature.
7. Min/Max/Hold: shows if a MIN, MAX or Hold value is displayed
in the secondary display.
8. Secondary display: shows MIN, MAX or Hold value acc. to
selected function.
1.5 Basic operation
When switching on the device and the logger function is not off
the time of the integrated clock will shortly be displayed. If a zero
point adjustment was carried out the display shows shortly "nuLL
Corr".
After changing the battery the clock-setting menu is activated
automatically (´CLOC´). Check the clock and adjust, if necessary
(see chapter 2).