TechniSat SkyCable QPSK/DVB-T CI TWIN - Handbuch (Seite 58)

58
EN
2.
Sat Frq:11954MHz
Satellite downlink frequency
The frequency input is entered in MHz using the numeric buttons.
The data is transferred when the OK button is pressed.
3. Sat SR:27500KB Symbol rate
The symbol rate is entered in baud using the numeric buttons.
The data is transferred when the OK button is pressed.
4.
LNB Frq:10600MHz
LNB local oscillator frequency (LO)
The LO frequency is entered in MHz using the numeric buttons and
depends on the satellite frequency range.
Low band from 10.70–11.70 GHz ≙ LO = 9750 MHz
High band from 11.70-12.75 GHz ≙ LO = 10600 MHz
The data is transferred when the OK button is pressed.
09750MHz = LO frequency for low band
10600MHz = LO frequency for high band
5.
LNB Set:18V/22kHz
Controlling the integrated multi-switch
Press the ► or ◄ cursor button to set the control voltage for the
integrated multi-switch and hence select the SAT IF level. The data is
transferred when the OK button is pressed after selection.
13V/ OK = Vertical low band
18V/ OK = Horizontal low band
18V/22K = Horizontal high band
13V/22K = Vertical high band
6.
CI:No Module
CAM type
Displays the designation of an available CAM. If no CAM is available the
message “No Module” appears.
7.
CI:Program
CAM program selection
Here you can select which of the programs available in the reception
signal are unlocked by the smart card. Only functions when a CAM is
available.
8.
Decoder:TS-B
Tuner selection
Press the ► or ◄ cursor button to select which transport stream (TS)
from which tuner input is used for the modulator. The data is
transferred when the OK button is pressed after selection.
TS-A = Transport stream from Tuner A
TS-B = Transport stream from Tuner B
9.
Pg:F -No 28007
Output program selection
This menu item is used to define which program is converted into PAL.
Press the ► or ◄ cursor button to select the program you want. The
data is transferred when the OK button is pressed.
10. Screen:16:9 Full Picture format
Press the ► or ◄ cursor button to select the picture format setting.
The data is transferred when the OK button is pressed alter selection.
16:9 Full = 16:9 picture format
4:3 Full = 4:3 picture format
4:3 LB = 4:3 letterbox picture format