TechniSat SkyCable QPSK/DVB-T CI TWIN - Handbuch (Seite 59)

59
EN
11.
ScreenMode:Auto
Television standard
Press the ► or ◄ cursor button to select the picture format setting.
The data is transferred when the OK button is pressed alter selection.
Auto = Automatic
PAL = PAL standard
NTSC = NTSC standard
SECAM = SECAM standard
12.
Audio-Lang:none
Language selection
If multiple languages are available for the program in the transport
stream, you can select the language that is modulated to the sound
carrier here.
13. Subtitle:DVB 1st Teletext
Press the ► or ◄ cursor button to select the teletext setting. The data
is transferred when the OK button is pressed after selection. If both
standards are available in the signal, only the selected
version is forwarded
DVB 1st = Teletext as per DVB standard
EBU 1st = Teletext as per EBU standard, teletext level 1
3.9.2.4 Display Line 3
Select line 3 as described in 3.9.2.2.
If the flashing cursor is located in the third line the following sub-items
can be called up by repeatedly pressing the Menu button:
1. RF Frq:112,25MHz = Output frequency
2. RF Attn:00dB = Output level attenuation
3. Audiomode:Stereo = Sound carrier mode
4. Volume:70 = Audio level
1.
RF Frq:112,25MHz
RF output frequency
The frequency output is entered in MHz using the numeric buttons. This
is the picture carrier frequency in PAL signals. The correct frequencies
can be taken from the table in section 5.5.
The data is transferred when the OK button is pressed.
2.
RF Attn:00dB RF T-pad attenuator
The attenuation value for the output level is entered using the numeric
buttons. 9dB max can be set.
The data is transferred when the OK button is pressed.
Watch the linearity of the wanted signal level for all the TWIN cards and
adjust the output level by setting it to the RF T-pad attenuator, while
watching the level parameters (see 5.6).
3.
Audiomode:Stereo
Sound sub-carrier mode
Press the ► or ◄ cursor button to set the sound sub-carrier to stereo,
mono or dual sound.
The data is transferred when the OK button is pressed.
4.
Volume:70
Audio level
The audio level is entered using the numeric keys. The value affects the
FM hub and hence the volume.
The data is transferred when the OK button is pressed.
01:QPSK->PAL A
Tuner Lock:Yes
RF Frq:140,25MHz
P010,010,110,100