TechniSat SkyCable QPSK/DVB-T CI TWIN - Handbuch (Seite 67)

67
EN
10.
Factory Setting?
Factory default setting
Press the OK button to get the selection option:
OK=Y
│
EXIT=N
Confirm by pressing OK and the entire card (receiving unit A and B) is
reset to the factory default settings (Preset). All settings previously made
are deleted irretrievably.
Exit this option by pressing EXIT. The card only becomes operable again
after the boot process is completed.
11. Reboot System? Reboot
Press the OK button to get the selection option:
OK=Y │ EXIT=N
Confirm with OK to reboot the card - exit this option by pressing EXIT. The
card only becomes operable again after the boot process is completed.
12.
SN:01009035002
Serial number
Displays the card’s serial number. No selection options.
3.10.3 Network Information Table (NIT)
The NIT describes the actual physical structure of the network. SkyCable cards are being able to
generate a valid NIT. The programming of NIT is performed exclusively with the TechniNet
Management Software.
3.10.3.1 Terrestrial Delivery System Descriptor
The NIT contains the Terrestrial Delivery Descriptor for the transmission of physical parameters
of each transport multiplex. It helps the end devices in the automatic library lookup.
3.10.3.2 Logical Channel Numbering (LCN)
The NIT contains the Logical Channel Descriptor which provides a default channel number label
for services. The intention of the Logical Channel Numbering is to provide an operator of cable
network assigned virtual channel number, for each of the services available to the STB receiver.