TechniSat SkyCable QPSK/DVB-T CI TWIN - Handbuch (Seite 60)

60
EN
3.9.2.5 Display Line 4
Select line 4 as described in 3.9.2.2.
If the flashing cursor is located in the fourth line the following sub-items
can be called up by repeatedly pressing the Menu button:
1. P010,010,110,100 = IP address
2. M255,255,255,000 = Subnetzmaske
3. G010,010,060,001 = Standardgateway
4. T000,010,070,066 =
SNMP trap destination IP
address
5. MAC:000e26ff417b = MAC address
6. Temperature:37°c = Temperature
7. MainVer:28DM100a = Firmware version
8. MCU Ver:4,f0,3f = Software version
9. FPGA Ver:0,0,0b = FPGA version
10. Factory Setting? = Factory default setting
11. Reboot System? = Reboot
1.
P010,010,110,100
IP address
The IP address is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered. The IP
address is required for controlling the head station via a PC and should
only be allocated to the network once!
2.
M255,255,255,000
Subnet mask
The subnet mask is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered.
3.
G010,010,060,001
Standard gateway
The standard gateway is entered using the numeric keys. The data is
automatically transferred after all 12 digits have been entered.
4.
T000,010,070,066
SNMP trap destination IP address
The trap destination IP address is entered using the numeric keys. The
data is automatically transferred after all 12 digits have been entered.
5.
MAC:000e26ff417b
MAC address
Displays the card’s MAC address. No selection options.
6. Temperature:37°c Temperature
Displays the card temperature. No selection options.
7.
MainVer:28DM100a
Firmware version
Displays the card’s software version. No selection options.
8. MCU Ver:4,f0,3f Software version
Displays the card’s software version. No selection options.
9.
FPGA Ver:0,0,0b
FPGA version
Displays the card’s FPGA version. No selection options.
10.
Factory Setting?
Factory default setting
Press the OK button to get the selection option:
OK=Y ¦ EXIT=N
Confirm by pressing OK and the entire card (receiving unit A and B) is
reset to the factory default settings (Preset). All settings previously
01:QPSK->PAL A
Tuner Lock:Yes
RF Frq:140,25MHz
P010,010,110,100