TechniSat SkyCable QPSK/DVB-T CI TWIN - Handbuch (Seite 63)

63
EN
3.10.2 Programming the SkyCable DVB-S2/QAM CI TWIN card
The following description explains how to program a SkyCable DVB-S2/QAM TWIN card using
the programming remote control.
The programmer is connected to the ‘Handset’ port on the base unit via the supplied cable. The following
message appears in the programmer display:
3.10.2.1 Display Start
After pressing the cursor button ► the settings for card slot 01 are
displayed; those for card slot 08 are displayed by pressing ◄. The other
slots can be selected by pressing the cursor buttons again.
The numbering of the slots goes upwards from left to right.
3.10.2.2 Display Line 1
Select the card slot as described in 3.10.2.1
The flashing cursor indicates the selected card slot (02) and type (QPSK-
>QAM). Press the Menu button to toggle between the two receiving units
A and B.
Pressing the ▼ or ▲ cursor button moves the flashing cursor to another
line. In this line you can call up additional menu items by pressing the
Menu button.
3.10.2.3 Display Line 2
Select line 2 as described in 3.10.2.2.
If the flashing cursor is located in the second line the following sub-items
can be called up by repeatedly pressing the Menu button:
1.
Tuner Lock:Yes
= Input signal
2. Sat Frq:11954MHz = Satellite downlink frequency
3. Sat SR:27500Kb = Symbol-rate
4.
LNB Frq:10600MHz
= LNB local oscillator frequency (LO)
5.
LNB Set:18V/22kHz
= Multi-switch control
6. CI:No Module = CAM type
7. CI:program = CAM program selection
8.
Output:program
= Output program selection
1.
Tuner Lock:Yes
Input signal
No selection option, just a display showing whether the satellite tuner is
synchronised with the input signal.
Yes = Tuner is synchronised.
No = Tuner is not synchronised.
2.
Sat Frq:11954MHz
Satellite downlink frequency
The frequency input is entered in MHz using the numeric buttons.
The data is transferred when the OK button is pressed.
02:QPSK->QAM A
Tuner Lock:Yes
RF Frq:330,0MHz
P010,010,110,103
02:QPSK->QAM A
Tuner Lock:Yes
RF Frq:330,0MHz
P010,010,110,103
02:QPSK->QAM A
Tuner Lock:Yes
RF Frq:330,0MHz
P010,010,110,103
▓ TechniNet
Programmer
Ver 1,14
Please Press
◄ ►