EXFO FTB-7000 OTDR Series for FTB-500 - Handbuch (Seite 435)

SCPI-Befehlsreferenz
OTDR 421
Product-Specific Commands—Description
:INITiate[1..n][:IMMediate]
Description This command starts the acquisition according to
the active acquisition mode.
Acquisition mode:
ACQuisition: Acquisition stops after the duration
value has elapsed.
REALtime: Acquisition is in progress until an
abort event is sent.
CFConnector: Acquisition stops after
determining the injection level at the first
connector.
ASETting: Acquisition stops after determining the
adequate range and pulse values.
This command is asynchronous.
This command is an event and, therefore, has no
associated *RST condition or query form.
However, on *RST, the equivalent of an ABORt
command is performed on any acquisition in
progress.
Syntax :INITiate[1..n][:IMMediate]
Parameter(s) None
Example(s) INIT
See Also CONFigure[1..n]:ACQuisition:MODE
INITiate[1..n]:STATe?
ABORt[1..n]