Guntermann & Drunck DL-Compact - Handbuch (Seite 29)

Installation
G&D DL-Compact · 4
Installation
Preparation
1. Ensure that the computer to be connected to the KVM extender is switched off. If
the computer is provided with keyboard and mouse, unplug the cables of the
input devices from the interfaces.
2. Place the computer module (DL-Compact-CPU) close to the computer.
3. Place the user module (DL-Compact-CON) close to the remote console.
4. Take the supplied cables of the KVM extender and place them ready for install-
ing the devices.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1M.
They meet the requirements according to DIN EN 60825-1:2001-11, IEC 60825-1
as well as U.S. CFR 1040.10 and 1040.11.
Please note the following safety guidelines regarding this matter:

Avoid eye contact with laser beam on page 2
 Always connect optical connections or cover them with protection caps on page 2
NOTE: Please mind the maximum cable length of five metres between the com-
puter module and the computer to be connected.
NOTE: Please mind the maximum cable length of five metres between the user
module and the devices of the user console.