Guntermann & Drunck DVIVision-USB 2.0 - Handbuch (Seite 40)

Start-up
11 · G&D DVIVision-USB 2.0
Start-up
After the DVIVision-USB 2.0 system has been properly installed, it can be immedi-
ately put into operation.
Mind the following activation sequence while initiating the system for the first time:
1. Turn on the user module (DVIVision-CON).
2. Turn on the computer module (DVIVision-CPU).
3. Turn on the computer that is connected to the computer module.
After the system has been turned on, the LEDs on the front panel of both the com-
puter module and the user module signal the system’s operating status. For further
advices on this topic, also see the chapter Status displays on page 12 ff.
NOTE: The recommended activation sequence ensures that the DVIVision-USB 2.0
system is able to read out the features of the connected monitor and to transmit
them to the computer (see DDC transmission with cache function on page 16).