Baumer NE218 - Handbuch (Seite 24)

NE218
24 www.baumer.com
General Information
In the following you will find the explanations of the symbols used in
this operating manual.
Explanation of symbols ➜ This symbol indicates activities to be carried out.
● This symbol indicates supplementary technical information.
This symbol is located before texts to which particular attention is to
be paid to ensure proper use of the product.
This symbol is located before texts that provide important additional
information.
Italics Important terms in the left text column are printed in italics to help
you find information more quickly.
1 Safety instructions
General information
The products has been developed and built in accordance with the
recognized rules of technology. The units have left the manufacturing
plant ready to operate and in safe condition.
To keep the units in this condition, it is necessary that the units be
-installed and operated
-properly,
-in a safety and hazard-conscious manner,
under observance of this operating manual and in particular of these
safety precautions!
Make sure that the personnel has read and understood the operating
manual, and in particular the „Safety Instructions“ chapter.
In addition to the operating manual, the generally applicable legal and
other binding regulations for accident prevention and environmental
protection must be observed and ensured.
This manual is intended as a supplement to already existing docu-
mentation (catalogues, data sheets or assembly instructions).
Proper use
The application of the units consists of controlling and monitoring in-
dustrial processes in the metal, wood, plastics, paper, glass and tex-
tile industry etc.
The units may only be operated
-in the properly installed state and
-in accordance with the specifications of the technical data