Baumer NE218 - Handbuch (Seite 42)

NE218
42 www.baumer.com
6 Technical data
Technical data - electrical ratings
Voltage supply 115/230 VAC ±10 % (50/60 Hz), 24/48 VAC ±10 % (50/60 Hz)
24 VDC ±10 %
Power consumption 5 VA, 4 W
Sensor supply 12...26 VDC / max. 85 mA
Display LED, 7-segment display
Number of digits 6-digits
Digit height 14 mm
Function Preset counter, Main counter with 2 presets
Totalizer, Hour counter
Scaling factor 0.0001...9999.99
Count modes Adding or subtracting
A-B (difference counting)
A+B total (parallel counting)
Up/Down
A 90° B phase evaluation
Counting frequency 3 Hz, 25 Hz, 10 kHz programmable
Operating modes Step preset, Main preset, Parallel alignment, Trailing preset
Data memory >10 years in EEPROM
Reset Button, electric or automatic
Outputs relay Normally open or closed, programmable
Output holding time 0.01...99.99 s
Interfaces RS422, RS485
Standard DIN EN 61010-1 Protection class II
Overvoltage category II
Pollution degree 2
Emitted interference DIN EN 61000-6-3
Interference immunity DIN EN 61000-6-2
Programmable parameters Operating modes, Sensor logic, Scaling factor, Count mode,
Control inputs
Technical data - mechanical design
Operating temperature 0...+50 °C
Storing temperature -20...+70 °C
Relative humidity 80 % non-condensing
E-connection Plug-in screw terminals
Core cross-section 1.5 mm²
Protection DIN EN 60529 IP 65 (face with seal)
Operation / keypad
Membrane with softkeys
Housing type Built-in housing
Dimensions W x H x L 96 x 48 x 114.7 mm
Installation depth 115 mm
Mounting Clip frame
Cutout dimensions 92 x 44 mm (-0.6)
Materials Housing: Makrolon 6485 (PC), Keypad: Polyester
Weight approx. 350 g (AC), 250 g (DC)