5 programming mode – Baumer NE218 Benutzerhandbuch
Seite 33
NE218
www.baumer.com
33
5 Programming mode
Operating parameters are set on the programming mode.
The programming level is divided into 3 programming fields.
Access to the programming level is protected with a 4-digit code.
1st programming field
Here all operating parameters can be selected and changed. The
operating parameters that are blocked for the operator are also dis-
played.
2nd programming field
Here the individual operating parameters are blocked or released for
operator access.
3rd programming field
Here all machine-related functions and values, as well as the port pa-
rameters are programmed.
Key functions
Switch on Press the
key CodE appears in the display.
programming The system switches from the operator level into the
programming level.
Select programming lines Select the corresponding program line with the
key.
The corresponding line number is displayed. For rapid scrolling, press
and hold the
key.
Scroll back programming By pressing and holding the
key, it is possible to scroll back
lines within the programming lines by pressing the
key.
Change operating Select the decade to be changed with the
key.
parameters The selected decade flashes. Enter the value by pressing the
key.
Press the
key to acknowledge.
Exit programming Programming can be ended at any time by pressing the
key
(changing to operator level).
Reset to factory setting Switch on the device and press the keys
and
simultaneously.
All values already programmed are reset to the factory setting
‘ClrPro’ appears in the display.
To access programming
➜
Press the
key.
●
The system transfers from the operating to the programming
mode.
●
is displayed.
The code applies to programming segments 1-3.
Enter code Enter the code with the keys
and
.
Press the
key to acknowledge.