Guntermann & Drunck DL-MUX4 - Handbuch (Seite 55)

Initial configuration of the network settings
G&D DL-MUX4 · 11
English
Initial configuration of the
network settings
A basic requirement to access the web application is to configure the network set-
tings of the KVM switch on which the web application is operated.
How to configure the network settings before integrating the device into the local
network:
1. Use a category 5 (or better) twisted pair cable to connect the network interface of
any computer to the device’s Network A interface.
2. Ensure that the IP address of the computer’s network interface is part of the sub-
net to which the device’s IP address belongs to.
3. Switch on the device.
4. Start the computer’s web browser and enter the URL https://192.168.0.1 in the
address bar.
5. Authenticate your user account against the web application.
6. Click the tools symbol in the toolbar.
7. Click the Configuration > Interfaces tabs.
NOTE: In the defaults, the following settings are pre-selected:
 IP address of network interface A: 192.168.0.1
 IP address of network interface B: address obtained using DHCP
 global network settings: settings obtained using DHCP
NOTE: Use the IP address 192.168.0.100, for example.
NOTE: These are the default access data for the administrator account:
 Username: Admin
 Password: 4658
Change the preset password of the administrator account. The manual of the
web application provides a detailed description of how to change the preset
access data.