Guntermann & Drunck TradeSwitch8-USB - Handbuch (Seite 59)

Configuration
G&D TradeSwitch8-USB · 13
English
Configuration
The configuration of the KVM switch can optionally be changed in the setup mode
or in the setup menu:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.
Overview of the functions and default settings
The following table lists functions that can be configured as well as their default set-
tings of the KVM switch.
Detailed description of the functions is given in the following pages:
Basic operation of the setup mode as well as the setup menu is explained in the fol-
lowing pages.
NOTE: The USB keyboard type (see page 31) can only be selected in the setup menu
where you can also find the configuration settings of the KVM switch.
Function Default Page
Using single or double hotkeys single hotkeys 17
Changing the single hotkey Alt Gr 18
Changing the double hotkey Alt Gr+Ctrl 19
Changing the select keys 1 to 8 20
Disabling/Enabling the hotkey delay 7 seconds 21
Resetting the defaults 22
Auto-accessing the first channel disabled 23
Enabling/disabling switching via front buttons enabled 24
Enabling/disabling switching via hotkeys enabled 24
Enable/disable switching via step keys disabled 25
Enabling/disabling switching via mouse disabled 26
Enabling »CrossDisplay-Switching« (CDS) disabled 27
Setting the CDS mouse speed 5 28
Changing the bit rate of the Service port 115.200 29
Changing the standard mode of the Service port switch 30
Selecting the USB keyboard type PC Multimedia 31
Enabling/Disabling USB 2.0 data transmission enabled 32
USB pinning disabled 33