Guntermann & Drunck TradeSwitch8-USB - Handbuch (Seite 64)

Configuration
18 · G&D TradeSwitch8-USB
Changing the single hotkey
Press the hotkey and the Backspace key simultaneously to start the setup mode of the
KVM switch. Pressing the hotkey and the select key simultaneously enables the
switching of channels.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
How to change the current hotkey:
NOTE: The single hotkey Alt Gr is preset at default.
Setup M
o
de
1. Press Hotkey+Backspace (default: Alt Gr+Backspace ) to enable the setup
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable a certain hotkey:
Alt Gr  Enables Alt Gr hotkey
Win  Enables Win hotkey
Shift  Enables Shift hotkey
Ctrl  Enables Ctrl hotkey
Alt  Enables Alt hotkey
Setup Men
u 1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter » #! « to change to the setup menu.
2. Use the Arrow or Arrow keys to select the Hotkey row.
3. Press the Space key (repeatedly) to enable a certain hotkey:
Alt Gr  Enables Alt Gr hotkey
Win  Enables Win hotkey
Shift  Enables Shift hotkey
Ctrl  Enables Ctrl hotkey
Alt  Enables Alt hotkey
4. Press the S key to save your settings.