Guntermann & Drunck TradeSwitch8-USB - Handbuch (Seite 68)

Configuration
22 · G&D TradeSwitch8-USB
Resetting the defaults
This function resets the default settings of the KVM switch.
How to reset the default settings:
IMPORTANT: Performing this function reactivates the default settings of the KVM
switch as shown on page 13.
Setup M
o
de
1. Press Hotkey+Backspace (default: Alt Gr+Backspace ) to enable the setup
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press the setup key listed below to reset the default settings:
D  Resets default settings
Setup
Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter » #! « to change to the setup menu.
2. Use the Arrow or Arrow keys to select the Set System Defaults row.
3. Press Enter to reset the default settings.
4. Confirm the pop up security query with Enter .
Pressing the Q key cancels the function.