WIKA TR10-A - Handbuch (Seite 4)

3345267.12 01/2014 GB/D
4 WIKA operating instructions RTD and TC, intrinsically safe designs (Ex i)
GB
1. General information
■ The instrument described in the operating instructions has been designed and manufactured
using state-of-the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems are certified to ISO 9001
and ISO 14001.
■ These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■ Observe the relevant local accident prevention regulations and general safety regulations for
the instrument‘s range of use.
■ The operating instructions are part of the instrument and must be kept in the immediate vicinity
of the instrument and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions, prior to
beginning any work.
■ The manufacturer‘s liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the instrument.
■ The general terms and conditions, contained in the sales documentation, shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
[email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death,
if not avoided.
CAUTION!
... indicates a potentially dangerous situation, which can result in light injuries or
damage to equipment or the environment, if not avoided.
Information
… points out useful tips, recommendations and information for efficient and trouble-
free operation.
1. General information