AEG BP5013021M - Handbuch (Seite 36)

Installing the door and the glass panels
A B C
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a dec-
orative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on
the screen-printing zones is not rough
when you touch it.
Make sure that you install the top panel
in the seats correctly (refer to the illustra-
tion).
11. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The oven does not heat
up. The appliance is deacti-
vated. Activate the appliance.
The oven does not heat
up. The clock is not set. Set the clock. Refer to
"Setting the time of
day".
The oven does not heat
up. The necessary settings
are not set. Make sure that the set-
tings are correct.
The oven does not heat
up. The automatic switch-off
is on. Refer to "Automatic
switch-off".
The oven does not heat
up. The Child Lock is on. Refer to "Deactivating
the Child Lock".
36 www.aeg.com