AEG BP5013021M - Handbuch (Seite 37)

Problem Possible cause Remedy
The oven does not heat
up. The fuse in the fuse box
is released. Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate. The oven lamp is defec-
tive. Replace the oven lamp.
The Pyrolysis does not
start. The display shows
C3. The door is not fully
closed or the door lock is
defective. Fully close the door.
The display shows F102. The door is not fully
closed or the door lock is
defective. 1. Fully close the door.
2. Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse
box and activate it
again.
3. If the display shows
F102 again, contact
the service centre.
The core temperature
sensor does not oper-
ate. The plug of the core
temperature sensor is
not correctly installed in-
to the socket. Put the plug of the core
temperature sensor as
far as possible into the
socket.
The oven does not heat
up. The display shows
Demo. The demo mode is acti-
vated. 1. Deactivate the appli-
ance.
2. Press and hold the
button +.
3. When an acoustic
signal sounds, turn
the knob for the
oven functions to the
first function. Demo
flashes in the dis-
play.
4. Turn the knob for
the oven functions to
the off position.
5. Release the button
+.
6. Turn the knob for
the temperature
clockwise for three
seconds. The acous-
tic signal sounds
three times. The
demo mode is deac-
tivated.
ENGLISH
37