Guntermann & Drunck FIBREVision - Handbuch (Seite 100)

Configuration
G&D FIBREVision · 27
English
PS/2 AutoRepeat of computer modules
When pressing a key for a longer time, the computer module repeatedly sends the
scancode of the pressed key to the connected computer (AutoRepeat) as long as you
press the key.
Some special keyboards can be configured to prevent Auto-Repeat. When using
such a keyboard, you can disable the setting PS/2 AutoRepeat on the setup menu.
How to enable/disable the PS/2 AutoRepeat function of computer modules:
Ctrl+Alt+F9 Find
Ctrl+Alt+F10 Cur
Ctrl+Alt+F11 Help
Ctrl+Alt+F12 Mute
Ctrl+Alt+NUM+ Loud
Ctrl+Alt+NUM- Quiet
Ctrl+Alt+NUM* Compose
Ctrl+Alt+Pause Shutdown
Pause+A Stop
IMPORTANT: The setting only has an effect if the keyboard and mouse signals of
the workstations are transmitted to the computer by using the PS/2 interfaces
Mouse CPU and Keyb. CPU .
NOTE: This setting can be enabled on the setup menu only.
Setup menu
1. Use the terminal emulator to establish the connection to the DVIVision system.
2. Use the arrow keys to select PS/2 AutoRepeat .
3. Press the Space key (repeatedly) to enable a particular hotkey:
Yes  When pressing a key for a longer time, the scancode of the
pressed key is sent repeatedly to the computer (standard).
No  The scancode is sent only once no matter how long you
press the key.
4. Press S to save your settings.
KEY COMBINATIONS »SOLARIS SHORTCUT KEY« OF SUN KEYBOARDS