1 die wiedergabe-taste [►] drücken, 2 die pausentaste [ii] drücken, Zurückschalten auf normale wiedergabe – Panasonic NVEX1EG Benutzerhandbuch

Seite 27: 1 press the play button, 2 press the pause button [11, Resuming normal playback, Using the jog dial (jog playback)

Achtung! Der Text in diesem Dokument wurde automatisch erkannt. Um das ursprüngliche Dokument anzeigen, können Sie den "ursprünglichen Modus" verwenden können.

Advertising
background image

DEUTSCH

ENGLISH

Wiedergabe von Standbildern und

Einzelbild-Fortschaltung

(Standbild-ZEinzelbild-Wiedergabe)

Sie können das Geschehen auf dem Bildschirm

während der Wiedergabe stoppen und dann Standbilder

Bild um Bild wiedergeben.

1

Die Wiedergabe-Taste

[►]

drücken.

2

Die Pausentaste [II] drücken.

Die Wiedergabe wird im Standbild-Modus gestoppt.

3

Die Zeitiupen-/Einzelbiid'Taste

[<*(]

oder [!»]

auf der Fernbedienung drücken.

Beim Drücken der Taste [-«l] erfolgt die Einzelbild-

Wiedergabe in Rückwarstrichtung und beim

Drücken der Taste [!►] in Vonwärtsrichtung.

•Bei jedem Druck auf die Taste [-«l] wird um ein

Standbild zurückgeschaltet. Bei jedem Druck auf die

Taste [!►] wird um ein Standbild vorwärtsgeschaltet.
Wenn Sie die entsprechende Taste gedrückt halten,

erfolgt kontinuierliche Einzelbild-Wiedergabe in

Rückwärts- bzw. Vorwärtsrichtung so lange, bis Sie

die Taste loslassen.

• Wenn Sie den Camerarecorder länger als

6

Minuten

im Modus Standbild-Wiedergabe lassen, schaltet er
automatisch auf den Stopp-Modus um, damit die

Videoköpfe gegen übermäßige Abnutzung geschützt
werden.

•Während der Einzelbild-Wiedergabe ist die Timecode-

Anzeige u. U. nicht präzise.

Zurückschalten auf normale Wiedergabe

Die Wiedergabe-Taste [P-] drücken.
Die Wiedergabe wird mit Normalgeschwindigkeit

fortgesetzt.

Benutzen der Jog-Wiedergabe-Funktion

Durch Drehen des Jog-Reglers (Regler [PUSH]) O
Camerarecorder im Standbiid-Wiedergabe-Modus
können Sie ebenfalls Einzelbild-Wiedergabe in
Vonwärts- oder Rückwärtsrichtung durchführen.

Playing Back Still Pictures and

Advancing Them One by One

(Still PlaybackfStill Advance Playback)

You can freeze the action during playback and advance
the still pictures one by one.

1

Press the Play Button [^].

2

Press the Pause Button [11].

The playback picture stops in the Still Playback

Mode.

3

Press the Slow Motion/Still Advance Button
[^1] or [!»■] on the Remote Controller.

Pressing the [-«i] Button advances the still picture

frame by frame in reverse direction. Pressing the

[I»-] Button advances the still picture frame by

frame in forward direction.

•Each press of the [-*

1

] Button advances to the next still

picture in reverse direction. Each press of the

[l*>]

Button advances to the next stiil picture in forward

direction. Keeping either button pressed continuously
advances the still picture frame by frame until you

release the button.

• If you leave the Movie Camera in the Still Playback

Mode for more than

6

minutes, it switches over to the

Stop Mode to protect the video heads against
excessive wear.

• During Still Advance Playback, the Time Code

Indication may not be accurate.

Resuming Normal Playback

Press the Play Button [►].
Playback continues with normal speed.

Using the Jog Dial (Jog Playback)

By turning the Jog Dial ([PUSH] Dial) O the Movie
Camera in the Still Playback Mode, you can advance

the still pictures one by one in forward or reverse
direction.

-52-

Advertising