BECKHOFF CB2051 - Handbuch (Seite 58)

Kapitel: BIOS-Einstellungen Power Management Setup
Seite 58 Beckhoff New Automation Technology CB2051
4.7 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function [Enabled]
ACPI Suspend Type [S1(POS)]
Item Help
Run VGABIOS if S3 Resume Yes
Power Management [User Define]
Video Off Method [DPMS]
Video Off in Suspend [Yes]
Suspend Type [Stop Grant]
Modem Use IRQ [3]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Soft-Off by PWR-BTTN [Instant-Off]
PWRON After PWR-Fail [On]
Wake-Up by PCI card [Disabled]
Power On by Ring [Disabled]
x USB KB Wake-Up From S3 Disabled
Resume by Alarm [Disabled]
x Date(of Month) Alarm 0
x Time(hh:mm:ss) 0 : 0 : 0
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ü ACPI function
Optionen: Enabled / Disabled
ü ACPI Suspend Type
Optionen: S1(POS) / S3(STR) / S1&S3
ü Run VGABIOS if S3 Resume
Optionen: Auto / Yes / No
ü Power Management
Optionen: User Define / Min Saving / Max Saving
ü Video Off Method
Optionen: Blank Screen / V/H SYNC+Blank / DPMS
ü Video Off In Suspend
Optionen: No / Yes
ü Suspend Type
Optionen: Stop Grant / PwrOn Suspend
ü MODEM Use IRQ
Optionen: NA / 3 / 4 / 5 / 7 / 9 / 10 / 11
ü Suspend Mode
Optionen: Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12Min / 20 Min / 30 Min / 40 Min / 1 Hour
ü HDD Power Down
Optionen: Disabled / 1 Min ... 15 Min
ü Soft-Off by PWR-BTTN
Optionen: Instant-Off / Delay 4 Sec
ü PWRON After PWR-Fail
Optionen: Former Sts / On / Off