LumaSense Technologies ISR 12-LO/GS - Handbuch (Seite 21)

IMPAC pyrometers ISR 12-LO/GS
21
9.6 Number of devices
With a click on “Number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices
are selected, always 2 windows are displayed for settings or evaluation.
9.7
Basic settings
Under pyrometer parameters all preset values
can be displayed and modified if necessary. If the
window pyrometer parameters displayed, chang-
ing of settings on the pyrometer is blocked.
The window pyrometer parameter contains all parameter
settings described in section 8, Parameters.
Notes:
• “Basic range” displays the total range of the pyrometer
automatically and cannot be changed. If the sub range
is changed, confirm it with the small OK button which
appears.
• Under “Material “ you have the possibility to store the
names of different measuring objects with their emis-
sivity values and to recall them from the list.
• A click on the laser targeting light icon ( ) turns the
laser targeting light on or off at this point. After approx.
two minutes the laser targeting light is switched off
automatically.
The open / save button enable to store and recall own pyrometer configurations.
“1 meas.” shows the last pouring stream temperature in the pyrometer parameters window for
approx. 1 second.
If the pyrometer is used in another mode than pouring stream, „1 meas.“ shows the current
measuring temperature for approx. 1 second.
In this window the pouring stream mode can
be switched on and off (standard setting at the
ISR 12-LO/GS is “on”).
Descriptions to the parameters are to find un-
der 8.1 pouring stream mode).