Gb 3. overview – WIKA CAL Benutzerhandbuch
Seite 19
19
WIKA instruction manual WIKA-CAL
14097663.01 04/2014 GB/D
GB
3. Overview
1
2
3
4
5
If a pressure value is entered in the left-hand column and [Enter] is pressed, the
cells above are populated with uniformly distributed values. For example, fill the
lower left-hand cell with the full-scale value → uniformly distributed values to start of
the measuring range will be completed in the cells above.
It is also possible to calculate trim masses in order to calculate the masses for a
pressure value, or vice versa. It is also possible to enter the mass numbers.
For the correction of the measured values the measured ambient conditions and
the piston temperature are used. The piston position is used to display the floating
position. In addition, for absolute pressure instruments, the vacuum residual
pressure must also be specified. Through CPU6000 series instruments, this can be
read automatically.
3.2.1.3 Setup, language, dongle upgrade, dongle sync, database connection,
object manager
1. Language
Selection of the different languages. The software is continually being updated and
additional languages are being added.