WIKA CAL - Handbuch (Seite 53)

53 WIKA instruction manual WIKA-CAL
14097663.01 04/2014 GB/D
GB
6. Object manager
6.3.14 Weights
Masses are generally stated as “Overhang”, “Mass” and “Topmass”. These masses
are assigned to a mass set and this, in turn, to one or more pistons.
Overhang e.g. overhangs (bell jars) or plates, “Mass” weights can be placed only on
these.
Mass e.g. mass loads with a bore (recess); these masses can only be placed if
an “Overhang” has been placed first.
Topmass e.g. mass loads without hole (recess); these masses can always be
placed. Either directly on a piston, on an “Overhang” or on a “Mass”.