WIKA CAL - Handbuch (Seite 60)

60 WIKA instruction manual WIKA-CAL
14097663.01 04/2014 GB/D
GB
6. Object manager
6.3.21 Shunts
Shunts (measuring resistors) are not assigned to any instruments or work stations and
are thus available for each work station. In the document view these are only available
for selection if a multimeter has been selected (see chapter 6.3.17 “Multimeters”) and if
the property “Use of shunts” is enabled.
Shunts continue to have, as multimeters and standards used, an additional influence on
the measurement uncertainty.