WIKA CAL - Handbuch (Seite 5)

5 WIKA instruction manual WIKA-CAL
14097663.01 04/2014 GB/D
GB
1. General information
1. General information
1.1 Description
The WIKA-CAL calibration software is used for generating calibration certificates or
logger protocols for pressure measuring instruments and is available as a demo version
for a cost-free download on the homepage. Calibration certificates can be created with
the Cal-Template and logger protocols can be created with the Log-Template. In order
to switch from the demo version to a full version of the respective template, a USB key
with the template has to be purchased. The pre-installed demo version automatically
changes to the selected full version when the USB key is inserted and is available as
long as the USB key is connected to the computer.
1.2 Licence agreement
Subject of the contract
The subject of the contract is the USB key for unlocking the respective templates within
the WIKA-CAL calibration software.
Grant of licence
You, as the licensee, are entitled to use the USB key in your company at any place, also
at several work stations. However, one USB key may only unlock the relevant templates
for one work station.
You, as licensee, may not:
modify, translate, reconvert, decompile, disassemble or decode the program in whole or
in part as well as develop other software derived from the program.
Ownership of rights
With the purchase, you only acquire ownership of the USB key, on which the activation
is coded. You will not hold the rights to the program itself. Any and all rights for
publication, reproduction, editing and usage of the program shall remain with WIKA.
Warranty and limitation of liability
■ WIKA guarantees that the USB keys, on which the release of the templates is coded,
are faultless with regard to the selected material under normal operating conditions.
Should the USB keys present any defect, the USB keys may be returned to WIKA
within 30 days from the date of first purchase. The USB keys will be replaced prompt-
ly and free of charge.