Vanguard Managed Solutions Vanguard 6435 - Handbuch (Seite 54)

2-20 Hardware Description
Enhanced Vanguard Daughtercards
Configuring the
10/100BaseT Card The Vanguard 6435/6455 supports only one 10/100BaseT Enhanced Vanguard
Daughtercard at a time. However, the Vanguard 6435/6455 can simultaneously
support the onboard Ethernet 10BaseT port (Port 5) and the 10/100BaseT port
(either Port 10 or Port 13, depending on the card’s location).
Ethernet Port records can be configured for both ports (providing there are no
conflicts between the two records such as bridge link and router interface numbers).
• If you manually configure the onboard 10BaseT Port (Port 5), the
10/100BaseT port (Port 10/13) automatically uses the default Ethernet Port
record.
• If you do not configure either port, the 10/100BaseT Port (Port 10/13) uses the
default configuration and the 10baseT Port (Port 5) is disabled.
• You can configure the 10/100BaseT Port (Port 10/13) as NULL which
effectively disables the port.
For more information about configuring an Ethernet port, refer to the Ethernet
Basics Guide (Part Number T0109).
Multiple LANs The Vanguard 6435/6455 can simultaneously support only two LANs in any of these
combinations:
• Two Ethernet LANs
• One token Ring LAN and one Ethernet LAN
Note
The Ethernet LANs can be either two 10BaseT LANs or one 10BaseT and one
100 BaseT.