Burkert Type 4040 - Handbuch (Seite 25)

4040 - 23
english
Definitions and Abbreviations of Values Used
Abbrevi-
ation Display
(6 charac-
ters maxi-
mum) Description In module Meaning
Default value
Value
range
Unit Recipe datum Process datum Parameter datum Calibration datum
A Pipe surface before and
after lock AUTO conveyance
STOP without empty
run
STOP with empty run Calculated from D mm
t11 t11 Pause: remaining
conveying time without
empty run STOP without empty
run Medium is conveyed
using the last setting of
the conveying valve for
this period 60 1-255 s yes
t15 t15 Pause: remaining
conveying time without
empty run STOP with empty run Medium is conveyed at
empty-run speed for this
period 60 1-255 s yes
v v Actual speed at the
conveying valve AUTO conveyance
STOP with empty run
Momentary speed from
calculation 0 0-40 m/s yes
v0 v0 Target speed AUTO conveyance
STOP with empty run Target speed at end of
conveying line, internal
value for calculation 0 0-40 m/s yes
v0ist Actual speed at end of
conveying line AUTO conveyance
STOP with empty run
Momentary speed from
calculation 0 0-40 m/s yes
p p Conveying pressure AUTO conveyance
STOP without empty
run
STOP with empty run Pressure after
regulatory valve 0 0-10.00 bar yes
pa Absolute conveying
pressure AUTO conveyance
STOP without empty
run
STOP with empty run Absolute pressure after
regulatory valve 1 1-11.00 bar yes
p1 p1 Main pressure AUTO conveyance
STOP without empty
run
STOP with empty run System's entrance
pressure 0 0-10.00 bar yes
p1a Absolute main pressure AUTO conveyance
STOP without empty
run
STOP with empty run Absolute entrance
pressure 1 1-11.00 bar yes
QeffN Effective air quantity at
end of conveying line
(standard) AUTO conveyance Air quantity at end of
conveying line 0 0-10000 Nm 3/h yes
ActUal_
valve_lift Actual_lift Current setting of
conveying valve AUTO conveyance
STOP without empty
run
STOP with empty run for calculation of Q or v 0 0-100 % yes
T T Display of actual tempe-
rature AUTO conveyance
STOP without empty
run
STOP with empty run Measured or manually
entered temperature,
especially for the display 0 0-160 °C yes
Lock Operating
hours Lock's operating hours AUTO conveyance Current operating hours
(lock IN); save each
hour in EEPROM 0 0-65535 h yes
O
PERATION