LumaSense Technologies ISQ 5-LO - Handbuch (Seite 19)

IMPAC pyrometers ISQ 5 · ISQ 5-LO
19
Note: Before adjusting the parameters “emissivity”, “response time” and “analog output” via
the software, the online  offline switch (DIP-switch Nr. 4) must be set to the “online”
position in the pyrometer!
9.1
Connecting the pyrometer to a PC
The program InfraWin can operate up to two devices. For two devices using the RS232 interface, two PC
interfaces must be used. Two devices using RS485 may be operated simultaneously by the same interface,
if two different addresses have been properly entered (see 8.3 Address).
9.2
Installation
For installation select the setup program “setup.exe“ from the InfraWin-CD or from the downloaded and un-
packed zip file from the internet and follow the installation instructions.
9.3
Program start
After installation and the first program start a language must be chosen (German, English, French, Italian,
Spanish. The language also can be changed in the program). On the start page the screen shows the follow-
ing icons:
9.4
The menu
Opens a saved file
Storage of measured values for further processing
Online measurement with color bar display
Online measurement with graphic display
Setting of the parameters of the instrument
Setting of interface, baud rate and pyrometer addresses (RS485)
Time interval between two measurements
Number of connected instruments (max. 2)
Listing of measured or stored values in tabular form
Processing of measured (stored) readings in graph form
Processing of measured (stored) readings in a text file
Calculation of spot sizes in various measuring distances
Only if available: controls the programmable controller PI 6000
9.5
Beginning
Before using the software, the serial interface connected to the pyrometer has to be selected under
the Computer icon. For two devices using the RS232 interface, two PC interfaces must be used.
9.6
Number of devices
With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices
are selected, always 2 windows are displayed for settings or evaluation.