LumaSense Technologies ISQ 5-LO - Handbuch (Seite 20)

IMPAC pyrometers ISQ 5 · ISQ 5-LO
20
9.7 Basic settings
Under pyrometer parameters all preset values can
be displayed and modified if necessary.
This window contains all parameter settings described in
section 7 and 8.
Choose the correct setting for your application, the actual
setting is displayed.
Notes:
 “Basic range” displays the total range of the pyrometer
automatically and can not be changed.
 Under “Material“ you have the possibility to store the
names of different measuring objects with their emissivity
values and to recall them from the list.
 Choose whether the temperature should be displayed in
°C (Celsius) or °F (Fahrenheit).
 Standard operation mode is “Ratio temp.”. If “1-channel
temp.” is selected the pyrometer can be used like a con-
ventional mono channel pyrometer (see 8.8).
 If the pyrometer is equipped with a
laser targeting light the laser icon ( )
is visible. A click on the laser target-
ing light icon turns the laser targeting
light on or off at this point.
After approx. two minutes the laser targeting light is
switched off automatically.
 At models with built-in video module a TV icon instead of the laser icon is shown ( ) where some ad-
vanced display settings can be done.
 The devices ISQ 5-C and ISQ 5-LO-C have an additional PID-controller. The functions of this controller
can be activated with a click on the “PID” icon ( ).
The open / save button enable to store and recall own pyrometer configurations.
“1 meas.“ shows the current measuring temperature in the pyrometer parameters window for
approx. 1 second.
A click on the “Test” icon opens a window that
allows the direct communication with the py-
rometer via the interface commands (see sec-
tion 13, Data format UPP
® ).
After entering an interface command (00 is the
adjusted address ex works, “ms“ is the com-
mand “reading temperature value“) and a click
on “Send“ the displayed window is opened:
This window already shows the answer of the
pyrometer in
1 /
10
°. The actual temperature
reading is 1513.8°C.
“Len“ indicates the length of the answered data string, incl. Carriage Return (Chr(13)).
In the lower part of the window the connection with the preset baud rate can be checked. Here the command
was send 500 times with 19200 baud. It has taken 4.56 seconds and no transmission errors has occurred.
9.8
Configuration of the display on the TV screen
The video screen with the available display options can be configured here (only models with built-
in color video module).