Baumer BA ZADM023 - Handbuch (Seite 58)

Seite / Page 58
If it is not possible to place the object in the nominal measuring range, please be aware that with
deviations of less than
±
10% of the nominal measuring distance, the sensor works at its best.
The correct size of the reflective tape can be calculated as follows:
Remark:
-
The angle of the reflector against the sensor axes must be within
±
15°.
-
In some application it could happen to mount a shorter reflective tape as the measuring range.
Never mind as long as you choose a mode, so that the output current is changing when the ob-
ject is moving. For such cases it is also possible to optimize the measuring range with the
teach-in procedure.
1.2 x nominal measuring range x distance to reflector
length =
nominal measuring distance
recommended width:
measuring distance
50 mm 5 mm
measuring distance 150 mm 20 mm
measuring distance 350 mm 35 mm
measuring distance 1400 mm 50 mm