TechniSat TechniRouter 9/2x4 G - Handbuch (Seite 32)

32
EN
Trunk lines e. g. on staircase
VHF
UKW
UHF
TechniRouter
9/1x8G and K
8
previos new
A maximum of 8
subscribers per line
We recommend at least two sockets per residence are planned.
Splitter
Splitter
G
K
In the example shown, the practical compatibility of the system means it makes more
sense to use two switching matrices 9/2x4. The probability of interference between
participating neighbours is lower.
4.2 Setting up a New System
Advantage: Significantly fewer cables are required.
•
You do not need to construct a “star-shaped distribution”, and none of the receivers
need “their own” cables connected to a multiswitch.
•
Since the cable is very sensitive, you should install it at the end of the construction
progress. Where possible, use conduits for this purpose during installation. If the
conduit has bends or need to bridge long stretches, you must feed in the cable before
the laying process. Ensure there are no kinks in the cable. Do not expose to excessive
tensile strain.