6 technical data – TechniSat TechniRouter 9/2x4 G Benutzerhandbuch
Seite 42
42
EN
6 Technical Data
TechniRouter
9 / 1x8 G
9 / 1x8 K
9 / 2x4 G
9 / 2x4 K
Article number
0000/ 3294
0000/ 3295
0000/3296
0000/3297
Return path, terrestrial:
5..790 MHz
Satellite:
950...2150 MHz
RP /
Terr.
Sat.
RP /
Terr.
Sat.
RP /
Terr.
Sat.
RP /
Terr.
Sat.
Number of trunk inputs
1
8
1
8
1
8
1
8
Number of trunk outputs
1
8
1
8
Number of subscriber cables
1
1
2
2
Subscriber per cable
maximum 8
maximum 8
maximum 4
maximum 4
Subscriber number and
receiving channels
(User bands)
channel 1:
1284 MHz
channel
2:
1400 MHz
channel 3:
1516 MHz
channel 4:
1632 MHz
channel 5:
1748 MHz
channel 6:
1864 MHz
channel 7:
1980 MHz
channel 8:
2096 MHz
channel 1 :
1284 MHz
channel 2:
1400 MHz
channel 3:
1516 MHz
channel 4:
1632 MHz
Trunk loss
2...3
1)
dB
3 ... 5
dB
2...3
dB
3...5
dB
Gain
of the subscriber signals
-1 dB
13...18
dB
-8 dB
13...18
dB
-5 dB
17...22
dB
-12
dB
17...22
dB
Reflection loss
10 dB
Isolation
Trunks
Subscriber
45 dB
2)
30 dB
Input level,
satellite signal
recommended
70 dBµV
minimum
(
=
ˆ
sensitivity)
40 ... 35 dBµV, although the subscriber cables, depending on length,
must be supplied with far higher levels.
maximum
80 dBµV
3)
Phase noise
-60 dBc/Hz (SSB @ ∆f = 1 kHz from the carrier )
Power supply
for
devices
From the receivers
for LNBs
At the base unit, 230V / 18 V, 800 mA,
short circuit and overload protected
Power
requirement
in
operation
Maximum 4 W / 270 mA from the receiver, ∅7.5 W from the power supply
Standby
0 W from the receiver, 0.1 W from the power supply (single basic unit)
with two LNBs
(per 200 mA)
∅
∅
∅
∅
p.a.
Depending on TV habits, Benchmark
18 kWh
(single base unit)
Control
by the receiver
DiSEqC-Protocol as per to EN 50494
=
ˆ
Unicable, OLT, SCR or SCD
Special features
Each receiving channel can be protected by a PIN-Code, automatic power
save feature, traffic indicator = installation aid
Screening attenuation
In accordance with EN 50083-2 (TechniSelect S)
Environmental conditions
-25...+55°C, Surge protection at inputs and outputs: < 5 kV, IP 50
Accessories
deployable in the trunk
Intermediate amplifier 9Z, (double) tap 9/2A, passive distributor 9P
deployable in the subscriber
line
Intermediate amplifier 1Z (broadband, remote-fed), attenuator, distributor,
loop through sockets with 10 dB, 13 dB or 20 dB tap loss, terminal sockets
Dimensions:
l x
w x h,
weight
G:
290 x 114 x 43 (mm); 0.5 kg
K:
216 x 123 x 43 (mm); 0.36 kg
1)
Values at the lower ... upper band limits
2)
All other trunk and subscriber lines with signal
3)
Conforming to EN 50083-3: namely IMA3 at the output: 35 dB