WIKA T12 - Handbuch (Seite 7)

GB
3211517.07
07/2010
GB/D
WIKA operating instructions temperature transmitter T12 7
The technical specifications contained in these operating instructions
must be observed. Should the instrument be improperly handled
or operated outside of its technical specifications, it should be shut
down immediately and inspected by an authorised WIKA service
engineer.
If the temperature transmitter is transported from a cold into a warm
environment, the formation of condensation may result in the instru-
ment malfunctioning. Before putting it back into operation, wait for the
instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury to
personnel and damage to equipment.
■ The activities described in these operating instruc-
tions may only be carried out by skilled personnel who
have the qualifications described below.
■ Keep unqualified personnel away from hazardous
areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regula-
tions, current standards and directives, are capable of carrying out
the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge,
e.g. of aggressive media.
2. Safety