LumaSense Technologies ISR 50-LO - Handbuch (Seite 53)

INFRATHERM pyrometer ISR 50-LO
53
Digit 10 (0 ... 6 or 8): Baud rate
Digit 11 (0): Always 0
Digit 12 … 15: Emissivity slope
Device type: AAna Output: “ISR 50-LO“ (16 ASCII-characters)
Serial number: AAsn Output: XXXX (hex 4-digit)
Ref. number: AAbn Output: XXXXXX (hex 6-digit)
Device type /
software version: AAve Output: XXYYZZ (6-digit decimal)
XX = 54 for ISR 50-LO
YY = Month of software version
ZZ = Year of software version
Software version
in detail: AAvs tt.mm.yy XX.YY
tt = day; mm = month; yy = year; XX.YY = software version
Note: the letter “l” means the lower case letter of “L”.
Additional instruction for the RS 485 interface:
Requirements to the master system during half-duplex operation:
1. After an inquiry, the bus should be switched into a transmission time of 3 bits
(some older interfaces are not fast enough for this).
2. The pyrometer's response will follow after 3 ms at latest.
3. If there is no response, there is a parity or syntax error and the inquiry has to be repeated.
15 Reference numbers
15.1
Reference numbers instruments
3 882 900 ISR 50-LO MB 18: 700 ... 1800°C
3 882 910 ISR 50-LO MB 25: 800 ... 2500°C
3 882 920 ISR 50-LO MB 30: 1000 ... 3000°C
Scope of delivery: Converter ISR 50-LO with HD fibre, length: 2,5 m (other length 5 m, 6 m, 10 m or 15 m
possible for extra charge) and optical head, works certificate, PC software „InfraWin“, user manual.
Ordering note:
When ordering the following data are necessary:
• the measuring distance the optical head has to be adjusted
• the length of the fibre in case of another length as the standard of 2.5 m
A connection cable is not included in scope of delivery.
15.2 Reference numbers accessories
3 821 440 Connection cable 5 m, 11 wires, with additional digital cable (1 m)
3 821 450 Connection cable 5 m, 4 wires (for power supply and analog output)
3 834 390 ball and socket mounting for optical head
3 834 230 adjustable mounting support for optical head
3 835 180 air purge for optical head
3 835 240 90° mirror for optical head
3 852 290 Power supply NG DC for DIN rail mounting; 100 … 240 V AC
⇒ 24 V DC, 1 A
3 852 540 power supply NG 0D for DIN rail mounting; 85 ... 265 V AC
⇒ 24 V DC, 600 mA
3 852 550 power supply NG 2D, as NG 0D: additionally with 2 limit switches
3 890 640 LED digital display DA 4000-N
3 890 650 LED digital display DA 4000: with 2 limit switches
3 890 560 LED digital display DA 6000-N: with possibility for pyrometer parameter settings for digital
INFRATHERM pyrometers; RS232 interface
3 890 570 LED digital display DA 6000-N with RS485 interface
3 890 520 LED digital display DA 6000; DA 6000-N additional with 2 limit switches and analog input
and output
3 890 530 LED digital display DA 6000 with RS485 interface
3 826 500 HT 6000, portable battery driven indicator and instrument for pyrometer parameter setting