EUCHNER HBLS 072725 - Handbuch (Seite 41)

EUCHNER Pendant station HBLS 072725
067018-08-01/06 Subject to technical modifications page 19 / 22
10.1.5 Area Commands
With one short command, the user can define up to 32 areas, which can be deleted, inverted
or displayed flashing. The actual attribute will not be changed.
Command Byte Description Parameter
0x4A Definition of area Area-number, start-line, start-
column, end-line, end-column
0x4B Delete defined area Area-number
0x4C Inverse displayed area Area-number
0x4D Flashing displayed area Area-number
0x4E Inv. and flashing displayed area Area-number
0x4F Standard displayed area Area-number
Area-numbers: from 0x31 (area 1) to 0x51 (area 32).
If a non-defined area will be called, a acknowledge protocol with 0x33 will be sent.
Example of a data block, which defines the area-no. 22 from line 4, column 0 to line 6,
column 10:
0x6C 0x4A 0x46 0x34 0x30 0x36 0x3A
Example of a data block, which deletes area-no. 22:
0x6C 0x4B 0x46
Example of a data block, which displays area-no. 22 flashing:
0x6C 0x4D 0x46
10.2 Character Set