Hypertherm MAX200 Hand Torch Plasma Arc Cutting System - Handbuch (Seite 141)

15
STANDARD-KOMPONENTEN
MAX200 (Maschinenbrenner) Betriebsanleitung 6-27
Maschinenbrenner-Pakete (fortz.)
Siehe Abbildung 6-10
Position Teilenummer Beschreibung Menge
028773 Shield Torch Lead, 60 Ft. 1
1 023515 Lead Pilot, Shield Gas, 60 Ft. (blue) 1
2 024260 Lead, Plasma Gas, 60 Ft. (red) 1
3 024259 Lead, Cap Sensor, 60 Ft. (gray) 1
4 023052 Cable, Water Cooled, 60 Ft. (blue- red band) 1
5 023052 Cable, Water Cooled, 60 Ft. (blue- green band) 1
6 020536 Lead Insulator, 9/16" ID x 2-1/2" 1
7 046026 Tubing, 1-1/2" ID Shrink Black 1
8 046061 2" ID Tinned Braid 1
9 027015 Ring Compress, Shield Torch Lead 1
10 004080 Collar, Shield Torch Leads 1
11 015090 Clamp, Hose, 1-5/16 - 2-1/4" 1
028599 Shield Torch Lead, 75 Ft. 1
1 023622 Lead Pilot, Shield Gas, 75 Ft. (blue) 1
2 024319 Lead, Plasma Gas, 75 Ft. (red) 1
3 024318 Lead, Cap Sensor, 75 Ft. (gray) 1
4 023262 Cable, Water Cooled, 75 Ft. (blue- red band) 1
5 023262 Cable, Water Cooled, 75 Ft. (blue- green band) 1
6 020536 Lead Insulator, 9/16" ID x 2-1/2" 1
7 046026 Tubing, 1-1/2" ID Shrink Black 1
8 046061 2" ID Tinned Braid 1
9 027015 Ring Compress, Shield Torch Lead 1
10 004080 Collar, Shield Torch Leads 1
11 015090 Clamp, Hose, 1-5/16 - 2-1/4 1
Anmerkung: Hypertherm empfiehlt nicht den Einsatz von Brennerleitungen von mehr als 23 m Länge.
Leitungen von 30,5 m, 38 m und 46 m Länge verursachen Probleme beim Starten.
028781 Shield Torch Lead, 100 Ft. 1
1 023808 Lead Pilot, Shield Gas, 100 Ft. (blue) 1
2 024416 Lead, Plasma Gas, 100 Ft. (red) 1
3 024413 Lead, Cap Sensor, 100 Ft. (gray) 1
4 023805 Cable, Water Cooled, 100 Ft. (blue- red band) 1
5 023805 Cable, Water Cooled, 100 Ft. (blue- green band) 1
6 020536 Lead Insulator, 9/16" ID x 2-1/2" 1
7 046026 Tubing, 1-1/2" ID Shrink Black 1
8 046061 2" ID Tinned Braid 1
9 027015 Ring Compress, Shield Torch Lead 1
10 004080 Collar, Shield Torch Leads 1
11 015090 Clamp, Hose, 1-5/16 - 2-1/4 1