Lenze VisiWinNet VisiWinNET Smart - Handbuch (Seite 231)

Configuration
Communication
Configure CAN connection via codes
5
l
231 SHP−VWNS DE/EN 6.1
5.2.2 Configure CAN connection via codes
An EL1xx CAN can communicate with a CAN fieldbus system via the CAN interface.
Configure channel
Prerequisite:
ƒ The EL1xx is connected via LAN to the PC on which VisiWinNET
â
Smart has been
installed.
ƒ The EL1xx is connected to the controller via CAN.
For more information, please read the documentation for the EL1xx and the controller.
Proceed as follows:
1. Go into Project Explorer and create a new channel: Highlight the Variables /
Channels folder, right−click it and then select New.
2. In the line OPC−Server/Driver, click [...] and then select the LenzeCAN
communication driver.
3. Close the dialog with OK.
The channel is created and displayed in the project tree.
4. Double−click the new channel in the object tree and configure it on the Properties
page.