Lenze VisiWinNet VisiWinNET Smart - Handbuch (Seite 242)

Configuration
Communication
Configuring the L−force Logic (CoDeSys) connection
5
l
242 SHP−VWNS DE/EN 6.1
VWNS011
5.2.5 Configuring the L−force Logic (CoDeSys) connection
Via VisiWinNET
â
Smart V 6.2 (or higher), an "EL1xx PLC" can communicate with an L−force
Logic (CoDeSys) application.
Precondition:
ƒ VisiWinNET
â
Smart and L−force Logic (CoDeSys) have been installed on the same PC
or on different PCs that are connected to each other via LAN.
Configuring a channel
Proceed as follows:
1. Go into Project Explorer and create a new channel: Highlight the Variables /
Channels folder, right−click it and then select New.
2. In the line OPC−Server/Driver, click [...] and select CoDeSys.
3. Close the dialog with OK.
The channel is created and displayed in the project tree.
4. Double−click the new channel in the object tree and configure it on the Properties
page.