Burkert Type 8025 - Handbuch (Seite 16)

14
Installationandwiring
7 INSTALLATIoN AND WIRING
7.1 Safety instructions
danger
risk of injury due to electrical voltage.
▶ Shut down the electrical power source of all the conductors and isolate it before carrying out work on the
system.
▶ Observe all applicable accident protection and safety regulations for electrical equipment.
Warning
risk of injury due to non-conforming installation.
▶ The electrical installation can only be carried out by qualified and skilled staff with the appropriate tools.
▶ Install appropriate safety devices (correctly rated fuse and/or circuit-breaker); For the versions with a
115/230 V AC supply voltage, insert a safety device between the phase and the neutral conductor.
▶ Respect standard NF C 15-100 / IEC 60364.
risk of injury due to unintentional switch on of power supply or uncontrolled restarting of the
installation.
▶ Take appropriate measures to avoid unintentional activation of the installation.
▶ Guarantee a set or controlled restarting of the process subsequent to any intervention on the device.
protect this device against electromagnetic interference, ultraviolet rays and, when installed out-
doors, the effects of the climatic conditions.
7.2 Installation of a panel version
install the panel version of the device in a cabinet with a protection class at least ip54 to ensure a
degree of pollution 2 inside the cabinet.
English
Type 8025 UNIVERSAL