Burkert Type 8025 - Handbuch (Seite 60)

58
Operatingandcommissioning
8.7.5 monitoring the value of the daily totalizer
The parameter "VOLUME-W." makes it possible to monitor the value of the daily totalizer. When the set value is
reached, a warning message is generated by the device.
To deactivate the monitoring of the totalizer, set "VOLUME-W." to zero.
REtURN END
VOLUME-w. = 0000000
→
Enter the volume of the daily totalizer for which a warning message
is generated by the device.
→
Confirm.
wARNiNG
Figure 54: Diagram of the "VOLUME-W." parameter of the Test menu
When the warning message "WARN. VOL." is sent out, reset the totalizer: see chap. “8.5” or “8.6.15”.
→
If you do not want to adjust another parameter, confirm the "END" parameter to save the settings or not and
go back to the Process level.
8.8 Details of the Information menu
• This menu is available when the device status LED is orange or red.
• For the meaning of a message, go to chap. “9.3.2” and “9.3.3”.
To access the Information menu, press the key for at least 2 s, in the Process level.
In this menu read the fault and warning messages generated by the device.
MESSAGE 1
MESSAGE 2
MESSAGE N
END
0......9
Process level ENTER
0......9
Figure 55: Diagram of the Information menu
English
Type 8025 UNIVERSAL