Burkert Type 8025 - Handbuch (Seite 66)

64
Maintenanceandtroubleshooting
9.3.6 Resolution of problems linked to warning messages not
registered in the Information menu
Device
status leD current
output
Ao1 output Do1
and/or Do2
and/or Do3 message
displayed possible cause recommended
action
any colour 4-20 mA depending
on
thresholds
"PU H LIM" The message is displayed after
the pulse value has been entered
(parameter "PU" of the transistor
output DO1) or upon validation
of the settings of the Parameters
menu.
The pulse value times the K factor
of the device is > 1000000.
The entered volume for a pulse is
too high.
→
Enter a lower
volume value for a
pulse. See chap.
8.6.8.
any colour 4-20 mA depending
on
thresholds
"PU L LIM" The message is displayed after
the pulse value has been entered
(parameter "PU" of the transistor
output DO1) or upon validation
of the settings of the Parameters
menu.
The pulse value times the K factor
of the device is < 1.
The entered volume for a pulse is
too low.
→
Enter a higher
volume value for a
pulse. See chap.
8.6.8.
English
Type 8025 UNIVERSAL