Burkert Type 8025 - Handbuch (Seite 39)

37
Operatingandcommissioning
8.5 Details of the process level
This level is active by default when the device is energized.
12.6 L/MiN
16.45 MA
87654 L
231 L.
0......9
> 2 s
Resetting the daily totalizer.
Value of the measured flow rate, displayed in the unit chosen in the "UNIT" parameter
of the Parameters menu.
Value of the current output, proportional to the measured flow rate.
Value of the main totalizer, volume of fluid counted by the device since the last reset.
Value of the daily totalizer (identified by a dot after the volume units), volume of fluid
counted by the device since the last reset.
0......9
+
0 L/MiN.
The displayed flow rate is set to 0 (a dot is displayed after the
flow rate units when the funntion CUT-OFF is active) because
the measured flow rate is below the threshold value defined in
the "CUT-OFF" parameter of the Parameters menu. See chap.
“8.6.16”.
or
8.6 Details of the parameters menu
To access the Parameters menu, simultaneously press keys
ENTER
for at least 5 s.
This menu comprises the following configurable parameters:
English
Type 8025 UNIVERSAL