FMC Corporation - Talstar 80 - Handbuch (Seite 50)

Commissioning Proline Promass 80 PROFIBUS PA
50
6.5 PROFIBUS PA system integration
6.5.1 Device master file (GSD file)
For PROFIBUS network configuration, the device master file (GSD file) is needed for every bus user
(PROFIBUS slave). The GSD file contains a description of the properties of a PROFIBUS device, such
as supported data transmission rate and number of input and output data.
Before configuration takes place, a decision should be made as to which GSD file should be used to
operate the measuring device in the PROFIBUS DP master system.
The measuring device supports the following GSD files:
• Promass 80 GSD file (manufacturer-specific GSD file, complete device functionality)
• PROFIBUS Profile GSD file.
Below you will find a detailed description of the GSD files supported.
Promass 80 GSD file (manufacturer-specific GSD file, complete device functionality)
Use this GSD file to access the complete functionality of the measuring device. In this way, device-
specific measured variables and functionalities are thus completely available in the PROFIBUS
master system. An overview of the modules available (input and output data) is contained on the
following pages:
PROFIBUS PA
→ Page 53 ff.
GSD file with standard or extended format
The GSD file with either the standard or the extended format must be used depending on the
configuration software used. When installing the GSD file, the GSD file with the extended format
(EH3x15xx.gsd) should always be used first.
However, if the installation or the configuration of the measuring device fails with this format, then
use the standard GSD (EH3_15xx.gsd). This differentiation is the result of different implementation
of the GSD formats in the master systems. Note the specifications of the configuration software.
Name of the Promass 80 GSD file
How to acquire
• Internet (Endress+Hauser)
→ www.endress.com (→ Download → Software → Device Driver)
• CD-ROM with all GSD files for Endress+Hauser devices
→ Order No.: 56003894
Contents of the download file from the Internet and the CD-ROM:
• All Endress+Hauser GSD files (standard and extended format)
• Endress+Hauser type files
• Endress+Hauser bitmap files
• Information on the devices
ID No. GSD file Type file Bitmaps
PROFIBUS PA 1528 (Hex) Extended Format
(recommended):
Standard Format:
EH3x1528.gsd
EH3_1528.gsd EH_1528.200 EH_1528_d.bmp/.dib
EH_1528_n.bmp/.dib
EH_1528_s.bmp/.dib