FMC Corporation - Talstar 80 - Handbuch (Seite 51)

Proline Promass 80 PROFIBUS PA Commissioning
51
PROFIBUS Profile GSD file:
The function scope of the profile GSD file is defined by the PROFIBUS Profile Specification 3.0. The
function scope is restricted compared to the manufacturer-specific GSD file (complete device
functionality). However, similar devices from different manufacturers can be interchanged with the
profile GSD file without the need to reconfigure (interchangeability).
Profile GSD (multivariable) with the ID number 9760 (Hex): This GSD contains all the function
blocks such as AI, DO, DI etc. This GSD is not supported by Promass.
!
Note!
• Before configuration takes place, a decision should be made as to which GSD should be used to
operate the system.
• The setting can be changed via the local display or using a Class 2 master. Setting via the local
display. Page 48
GSD files supported:
→ Page 43
Each device receives an identification number (ID No.) from the Profibus User Organization (PNO).
The name of the device master file (GSD) is derived from this.
For Endress+Hauser, this ID No. starts with the manufacturer ID 15xx.
In order to ensure clarity and make assignment easier, the GSD names (with the exception of type
files) at Endress+Hauser are as follows:
Name of the PROFIBUS Profile GSD file
Source
Internet (GSD library of the PROFIBUS User Organization)
→ www.PROFIBUS.com
EH3_15xx EH = Endress + Hauser
3 = Profile 3.0
_ = Standard ID
15xx = ID No.
EH3x15xx EH = Endress + Hauser
3 = Profile 3.0
x = Extended ID
15xx = ID No.
ID No. Profile GSD file
PROFIBUS PA 9742 (Hex) PA139742.gsd