Selecting a keyboard layout for console keyboards, Configuring screensavers – Guntermann & Drunck DVIMUX8-OSD-USB Benutzerhandbuch
Seite 102
Configuration
33 · G&D DVIMUX8-OSD-USB
Selecting a keyboard layout for console keyboards
If the On-Screen Display of the KVM switch displays other characters than entered,
the adjusted keyboard layout does not comply with the keyboard.
Make sure what keyboard layout complies with the connected keyboard, and select
the applicable layout in the console settings.
How to select the layout of the console keyboard:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the menu.
3. Use the
Arrow keys
to select
Console Setup,
and press
Enter
.
4. Use the
Arrow keys
to select
Keyboard Layout
, and press
Space
to select one of the fol-
lowing options:
5. Press
F1
to save your settings.
Configuring screensavers
The screensaver of the KVM switch sets the connected monitor into power down
mode if the user is inactive during a defined period of time.
You can reactivate the monitor by pressing a key at the keyboard or moving the
mouse.
IMPORTANT:
The setting only applies for keys pressed within the On-Screen Dis-
play of the KVM switch.
If necessary, check the keyboard layout settings of the operating systems of the con-
nected computers.
German:
German (Germany)
English US:
English (USA)
English UK:
English (Great Britain)
French:
French (France)
NOTE:
The screensaver is disabled in the default configuration.
ADVICE:
After the screensaver is active at the KVM switch, you can disable the
screensavers of the connected computers.