Initial configuration of network settings, Configuring network ports – Guntermann & Drunck DVICenter DP32 Benutzerhandbuch
Seite 75
Central Module » Initial configuration of network settings
G&D DVICenter DP32 · 10
Initial configuration of network settings
Accessing the Config Panel web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A central module, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
Enter
to login and open the on-screen display.
3. Press
F11
to call the
Configuration
menu.
4. Select the
Network
entry and press
Enter
.
5. Select the
Settings
entry and press
Enter
.
6. Enter the following data in the
Interface A
(interface Network A) or
Interface B
(inter-
face Network B) section:
IMPORTANT:
In the default settings, the
Network A
port is assigned to the IP address
192.168.0.1
.
Username:
Enter the preset username
Admin.
Password:
Enter the preset password
4658
.
Operational
mode:
Press
F8
to select the operating mode of the interface
Network A
or
Network B
:
Off:
switches off network interface.
Static:
uses static settings.
DHCP:
obtains the settings from a DHCP server.
IP address:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.