WIKA UPT-21 - Handbuch (Seite 19)

19 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
4. Design and function
Display and operating unit (accessory)
The display and operating unit model DI-PT-U has a main and an additional display.
The main display and the additional display are able to be set in almost any way. In the
factory setting, the main display shows the pressure value of the output signal.
The process transmitter is configured via the display and operating unit.
Adaptable to mounting position
The process transmitter is fitted with a case head which can be turned through 330°.
The display and operating unit can be attached in 90° steps. Thus the measured value
can be read irrespective of the mounting position.
4.3 Scope of delivery
■ Pre-assembled process transmitter
■ Ordered accessories
■ Operating instructions
■ Measured value protocol
Cross-check scope of delivery with delivery note.
Displaceable display and operating unit
Rotatable case head
330°