WIKA UPT-21 - Handbuch (Seite 37)

37 WIKA operating instructions process transmitter, model UPT-2x
14068347.01 06/2014 GB/D
GB
9. Configuration via display and operating unit
9.4 Setting the mode
The mode defines which measurement parameter will be transmitted via the current
output (pressure, level)
If the PV (primary value) is indicated on the main display, the indicated
value will change according to the mode. This means that the main display
indicates the pressure or the level, depending on the mode.
1. Open the operating menu with [↵].
Select “Basic setting” and confirm with [↵].
2. Select “Application” and confirm with [↵].
3. Select “Mode” and confirm with [↵].
4. Select measurement parameter and confirm with [↵].
Mode is set.